FDCL221 Line seperator

Email
Part no.: A5Q00004011
C-Net loop connected line isolator. Used to create 'T' offs

Application
To avoid the breakdown of several stub lines in case of a short circuit, line separators may be inserted.

The line separator is used where several stub lines are connected to the C-NET at one point.

Retrofitting of existing, collective systems to the addressed Cerberus Pro FS72o fire detection system.


Function
The separator is an electric switch, which is integrated in the C-NET and separates the negative conductor in case if a short circuit, so that the short circuit-free side can continue to be operated.

the separator has 2x2 conductors for the detection line.

Yellow LED for the status indication signals the short circuit.

 

Communication protocol

C-NET

Operating voltage (modulated)

12... 33 VDC

Operating current (quiescent)

250 mA

Connection terminals

0.2... 2.5 mm2

Operating temperature

-25... +70 °C

Storage temperature

-30... +75 °C

Humidity

≤95 % rel.

Colour

transparent

Protection category EN60529/IEC529

IP44

System compatibility

C-NET FS720

Standards

Standards EN54-17

Dimensions

44 x 47.5 x 10 mm

Technical Details Table
007065
Technical Manual

 

007063
Data Sheet